包装袋的生产工艺其实本来就是一门技术，外卖打包袋的定制更是要比普通的包装袋更加挑剔，定做外卖打包袋需要注意下列几个问题：

The production process of packaging bags is actually a technology, and the customization of takeaway packaging bags is more picky than ordinary packaging bags. The following issues should be paid attention to when customizing takeaway packaging bags:

1、在选择外卖打包袋的厂家时，必须选择有经验的且有资质的企业，生产工艺必须成熟。

1. When selecting the manufacturer of takeaway bags, the experienced and qualified enterprises must be selected, and the production process must be mature.

2、食品生产经营应当符合食品安全标准，并符合下列要求：直接入口的食品应当使用无毒、清洁的包装材料、餐具、饮具和容器；

2. The production and operation of food shall comply with the food safety standards and the following requirements: the directly imported food shall use non-toxic and clean packaging materials, tableware, drinking utensils and containers;

3、食品经营者销售散装食品，应当在散装食品的容器、外包装上标明食品的名称、生产日期或者生产批号、保质期以及生产经营者名称、地址、联系方式等内容；

3. When selling bulk food, a food operator shall indicate the name, date of production or batch number of production, shelf life, name, address, contact information, etc. of the food on the container and outer package of the bulk food;

4、外卖打包袋要有足够的厚度和强度，这样才能保证食品袋的结实。

4. The takeout bag should have sufficient thickness and strength to ensure the firmness of the food bag.

定制外卖打包袋需要以下流程：

The following process is required to customize the takeout bag:

一：设计

1： Design

确定好包装袋规格、材质、厚度和袋型，在设计的时候尤其要注意包装袋上的文字信息，注意以下内容：包装袋厂家名、配料比如铁钙钠等、产品介绍、产地、净重量主要是以g/kg为单位、规格、食品标签号、QS认证、卫生许可证号、生产日期、储存条件、保质期、食用方法、生产厂商名称、厂址和联系电话，其中QS和条码一定不能少。

Determine the specification, material, thickness and bag type of the packaging bag, pay special attention to the text information on the packaging bag when designing, and pay attention to the following contents: the name of the packaging bag manufacturer, ingredients such as sodium iron, calcium, etc., product introduction, origin, net weight, mainly in g/kg, specification, food label number, QS certification, hygiene license number, production date, storage conditions, shelf life, edible method, manufacturer name Factory address and contact number, including QS and barcode.

二：制版

2： Platemaking

图稿确定完毕后，需要专门的技术员对图案进行分色、对一些不清晰的地方做修复，同时还需要十几个流程来完成制版。

After the draft is determined, special technicians are required to separate the color of the pattern and repair some unclear places. At the same time, more than ten processes are required to complete the plate making.

三：印刷

3： Printing

原材料准备完毕后使用高速印刷机将表层膜进行印刷（印刷时每一种颜色有一个板滚，板滚的雕刻是凹板雕刻），在印刷时油墨是不停的流动的，因为油墨会凝结，在油墨印刷和膜进行印刷时镶嵌了一个刮刀，刮刀是对板滚凸出的地方刮去油墨，这样凹进去的板滚就能印刷。如果刮刀上沾有灰尘就会出现条状的油墨污染现象。对于点状的油墨污染现象是因为油墨在滚动印刷时油墨的溅到包装膜上而造成了点状的油墨污染。

After the preparation of raw materials, use a high-speed printing machine to print the surface film (each color has a plate roller, and the engraving of the plate roller is concave engraving). During printing, the ink is constantly flowing, because the ink will condense. When printing the ink and the film, a scraper is embedded. The scraper is used to scrape the ink from the protruding part of the plate roller, so that the concave plate roller can be printed. If there is dust on the scraper, there will be strip of ink pollution. Spot ink pollution is caused by ink splashing on the packaging film during rolling printing.

四：复合

4： Compound

把印刷完毕的表层膜与易热封的里层膜用专用胶专用高速腹膜机进行复合。

The printed surface film and the inner film that is easy to be heat-sealed are compounded with a special high-speed peritoneum machine.

五：熟化

5： Ripening

复合完毕后需要在45度以上的熟化室进行24小时以上熟化，为的是使外卖打包袋不易脱层。

After the compound is completed, it needs to be matured for more than 24 hours in the curing room with a temperature of more than 45 degrees, in order to make the takeaway bag not easy to delaminate.

六：制袋

6： Bag making

此时外卖打包袋的制作已经进入尾声了，制袋技术员是需要有一定技能的，必须保证彩印包装袋封边良好不漏气，对烫刀的温度控制具有一定技术性。经质检员检验后出厂。

At this time, the production of takeaway bags has come to an end, and bag making technicians need to have certain skills. They must ensure that the edge of color printing packaging bags is good without air leakage, and the temperature control of the ironing knife has certain technical characteristics. The product is delivered after being inspected by the quality inspector.

七：质检

7： Quality inspection

包装袋主要的检测项目：规格尺寸长（mm）、宽（mm）、厚（um），外观、套印误差、色差、剥离强度、热封强度。

The main inspection items of the packaging bag include: length (mm), width (mm), thickness (um), appearance, overprint error, color difference, peeling strength and heat sealing strength.

八：入库

8： Warehousing

对质检合格的包装袋，进行包装好，同时进仓统一管理，以便后期出货方便。

The packaging bags that have passed the quality inspection shall be packed well, and the warehousing shall be managed uniformly at the same time, so as to facilitate the later delivery.

九：出货

9： Shipment

包装入库之后，联系客户，根据远近，进行远物流，近送货。远的地方进行物流配送（保证货物不被破坏），近的地方免费送货到门。更多相关内容就来我们网站//www.katc3.com进行咨询吧！

After packaging and warehousing, contact the customer to carry out remote logistics and delivery according to the distance. Logistics distribution is carried out in the far place (to ensure that the goods are not damaged), and free delivery is made to the door in the near place. Come to our website for more relevant content //www.katc3.com Consult!