楞型选择不当

Improper selection of corrugated shapes

瓷砖A的高度高，同样的纸，虽然有很好的竖向抗压能力，但在平面抗压方面不如B型和C型，产品装入瓷砖的纸箱后，纸箱在运输过程中，会受到横向和纵向的振动，包装与纸箱之间的反复撞击，会使彩盒纸箱壁变薄，产生一种现象。

Ceramic tile A has a high height, and although the same paper has good vertical compression resistance, it is not as good as B-type and C-type in terms of flat compression resistance. After the product is loaded into the ceramic tile cardboard box, the cardboard box will be subjected to horizontal and vertical vibrations during transportation. The repeated impact between the packaging and the cardboard box will cause the wall of the color box to become thinner, resulting in a phenomenon.

2. 成品铁锹堆放的影响

2. Impact of finished product shovel stacking

产品在成品仓库堆放的时候，一般会堆得很高，一般有两铲高，在纸箱堆垛过程中，纸箱尤其是底部纸箱的强度变化是一个“蠕变”过程，表现为长期作用在纸箱上的相对稳定的载荷，纸箱在静载荷作用下会不断弯曲变形，如果长时间保持静压，纸箱会塌陷损坏，所以堆放在铁锹上的下层纸箱经常会膨胀，有的还会被压坏，当纸箱受到垂直压力时，纸箱表面中心变形较大，压溃后的折痕呈现抛物线状和鼓包状，试验表明，瓦楞纸箱受压时，四角强度较好，但横边中点强度较差，所以上铲板的脚直接压在纸箱中间，造成纸箱中间集中受力，会造成纸箱开裂或变形，因为铲板的缝隙太宽，纸箱的边角掉进去，会造成纸箱过胖或鼓包。

When products are stacked in finished product warehouses, they are usually stacked very high, usually two shovels high. During the process of stacking cardboard boxes, the strength change of the cardboard boxes, especially the bottom cardboard boxes, is a "creep" process, manifested as a relatively stable load acting on the cardboard boxes for a long time. The cardboard boxes will continuously bend and deform under static load. If static pressure is maintained for a long time, the cardboard boxes will collapse and be damaged, Therefore, the lower carton stacked on the shovel will often expand, and some will be crushed. When the carton is under vertical pressure, the center of the surface of the carton will deform greatly, and the creases after crushing will appear parabolic and bulging. The test shows that when the corrugated carton is under pressure, the strength of the four corners is good, but the strength of the midpoint of the horizontal edge is poor, so the foot of the upper shovel board will press directly in the middle of the carton, causing concentrated stress in the middle of the carton, which will cause cracking or deformation of the carton, Because the gap between the shovel board is too wide, the corners of the cardboard box will fall in, causing the cardboard box to become too fat or bulging.

湘潭市金鹰彩色印刷有限公司

Xiangtan Jinying Color Printing Co., Ltd

3. 盒子高度的精确尺寸没有确定

3. The exact size of the box height has not been determined

一般碳酸饮料盒和水箱的纸箱高度确定为装有内容物的瓶子的瓶高加上2mm左右，纸箱堆放时长时间承受静载荷，运输过程中受到冲击、振动、颠簸，使纸箱壁厚变薄，增加了一部分高度，使纸箱高度远高于瓶子，从而使纸箱胖或鼓包更加明显。

The height of the cardboard boxes for carbonated beverage boxes and water tanks is generally determined as the height of the bottle containing the contents plus about 2mm. The cardboard boxes bear static loads for a long time during stacking, and are subjected to impacts, vibrations, and bumps during transportation, resulting in a thinning of the cardboard box wall thickness and an increase in height, making the cardboard box much higher than the bottle, thereby making the box more bulky or bulging.

彩盒包装生产厂家：解决彩盒纸箱肥袋或鼓包问题的措施

Color box packaging manufacturer: measures to solve the problem of fat bags or bulging in color box and cardboard boxes

1. 将纸箱的波纹形状确定为合适的波纹形状，在a型、c型和b型的波纹形状中，b型的波纹高度较低，虽然垂直耐压差，但是平面耐压更好，采用B型瓦楞纸箱后，虽然空箱抗压强度会降低，但内容物具有自弹性，支撑，堆垛时能承受部分堆垛重量，因此产品的堆垛效果也较好，在生产实践中，可根据具体情况选择不同类型的棱。

1. Determine the appropriate corrugated shape of the cardboard box. Among the corrugated shapes of A, C, and B, the corrugated height of B is lower. Although the vertical pressure resistance is poor, the planar pressure resistance is better. After using B-type corrugated cardboard boxes, although the compressive strength of the empty box will decrease, the content has self elasticity, support, and can withstand some of the stacking weight during stacking. Therefore, the stacking effect of the product is also good. In production practice, Different types of edges can be selected according to specific circumstances.

2. 改善仓库中产品的堆放条件

2. Improve the stacking conditions of products in the warehouse

如果仓库位置允许，尽量不要把两把铁锹堆得越高越好，如果需要将两铲堆高，为了防止成品堆放时载荷集中，可以在堆放中间夹一个瓦楞纸板或者使用平铲。

If the warehouse location allows, try not to stack the two shovel as high as possible. If it is necessary to stack the two shovels high, in order to prevent the load concentration when stacking finished products, a corrugated cardboard can be clamped in the middle of the stack or a flat shovel can be used.

3. 确定准确的纸箱尺寸，为了减少肥袋或鼓包现象，表现出良好的堆叠效果，我们将纸箱高度设置为与瓶高相同，特别是对于纸箱高度相对较高的碳酸饮料纸箱和纯水箱。

3. Determine the accurate size of the cardboard box. In order to reduce the phenomenon of fat bags or bulges and demonstrate good stacking effect, we set the height of the cardboard box to be the same as the height of the bottle, especially for carbonated beverage cardboard boxes and pure water tanks with relatively high cardboard box height.